22" 6mm 1.3# EPP Mini Extra

Customers are always asking me "What do I need to complete this kit?"
This page contains all the pieces specifically for building and flying the 22" EPP Mini Yak55.
You will need batteries, a transmitter and a receiver as well.

Go To Home Page
Go To Order Form
Contact Us
Picture of the Mini Extra
22" Mini Extra
Click to Enlarge

This version shrinks the popular Extra to a 67% size that allows it to be used in a smaller indoor venue while retaining all the great Extra qualities. With the power system we sell the weight comes in under 90g and using 180-250mah 2S batteries you get a great flying plane for small gymnasiums for the winter that is fully capable of flying outdoors in the better weather. We have also shrunken our standard paint scheme and they are available in the same colors popular with our standard 32" Extras.

Flat Foamie Series 22" 6mm EPP Mini Extra

The link below will always contain the latest instructions which might be more up to date than the paper copy included with the kit. Plus you can click on the pictures and get large color versions to better see details.

22" Mini Extra Instructions Addendum
EPP Flat Foamie Series Extra Instructions

The 6mm EPP Mini Extra YouTube video playlist.

Geoff Barber did a review of our 22" Mini Extra kit on RCUniverse.

The Extra Layout
The Kit
Click to Enlarge

RECOMMENDED PARTS AND ACCESSORIES

Mini 6mm EPP completer
$39.95 each
Quantities Limited.
The package currently includes:
C1822 Micro brushless Outrunner 2100kv (14g)
6A ESC (Speed Controller)
       Completer comes with UMX 2S battery connector installed on ESC
5g Servo (qty 1 - Aileron)
3.7g Servo (qty 2 - Rudder & Elevator)
(2S battery and 6x3 prop recommended)

We reserve the right to make equivalent product substitutions when availability requires.

Picture of the Mini completer set
Click to Enlarge
Battery Connector for the ESC side compattible with
the UMX 2S batteries for use on the Mini Yak55 and Mini P-51D.
One connector is included in each Mini completer.
These are in case you need to make a charging harness or adapter.

$2.00 each
picture of 
								UMX 2S Battery Connector
Click to Enlarge
O-Rings for use as Prop Savers for the Mini Completer
Dash Number 016, 1/16" fractional width, ID 5/8", OD 3/4"

$1 for a bag of 10
Prop Saver O-Rings

GemFan 6030 props used with 2S on our 6mm EPP Mini Yak55s, Mini Extras and Mini P-51D Mustangs.

$1.00 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of 
								GWS Props
Click to Enlarge
Flat Foamie Landing Gear
Click to Enlarge

Landing gear for Mini 22" foamies.

$15.00/set
The landing gear can be used indoors where you have a smooth surface and then is easily removed when you fly outdoors where the grass would be an issue.
Flat Foamie Landing Gear
Click to Enlarge
Beacon Foam-Tac

An excellent glue for bonding Carbon Fiber, EPP and Depron planes. Can be used to make a living EPP or Depron hinge. Stays flexible unlike foam safe CA. Now available in 2oz bottles, 1oz tube or the 6-pack of the new 5ml tubes (1.014oz total).

Beacon Foam-Tac (please select size)
$11.00 per 2oz bottle,
$8.00 per 1oz tube,
or
$8.00 for a package of six 5ml (Mini) tubes
.
Quantities Limited.

picture of 2oz Foam-Tac picture of 1oz Foam-Tac picture of 5ml Foam-Tac Minis
Click to Enlarge

Creation date: Sunday November 18, 2018
Last updated: Tuesday April 13, 2021

For more information send email to RA Cores

Go To Home Page
Go To Order Form
Contact Us