The 40" Extra XL
This is the next step in your aerobatic training. Working with Alan Mostek we created the follow on to our popular EPP Yak55 that will help you take your flying skills to the next level. Make no mistake that this plane will dial down so it can be flown sedately but it can be grown into and you can dial it up to 11 when you are ready. It is a bit more aggressive and agile than our Yak55 but sometimes that is what you need for the more hardcore maneuvers.
The one comment I have regularly heard over the years is, "I wish you sold a bigger version". Well, we listened and have created a 40" 125% version of the plane that satisfies those desires. In doing so we went with a KF4 airfoil (theory) which not only gives the plane great flight characteristics, it also strengthens the wing significantly. We have increased the fuselage thickness to 15mm EPP to strength it and even the tail stiffeners have been increased to 6mm EPP giving the tail great structural support. Be aware, these features have complicated the build (This is not a novice build) and we strongly recommend looking at the instructions and following the steps as they are laid out. The sequencing allows previous steps to dry while performing other steps. The KF4 airfoil (image) complicates the wing building over and above a typical flat foamie. (but the end results are well worth it)
The link below will always contain the latest instructions which might be more up to date than the paper copy included with the kit. Plus you can click on the pictures and get large color versions to better see details.
EPP Flat Foamie Series Extra XL InstructionsThe 40" Extra XL YouTube video playlist.
The colors available
Click to Enlarge
RECOMMENDED PARTS AND ACCESSORIES
|
|
GemFan 10x5 Thin E-Prop used on our 40" EPP Extra XLs, Yak55 XLs and 3D Delta XL. $2.00 each |
Click to Enlarge |
Click to Enlarge |
Landing gear for 40" XL foamies.$20.00/set The landing gear can be used where you have a smooth surface and then is easily removed when you fly where the grass would be an issue. |
Click to Enlarge |
You should be aware that the build uses most of 4oz of Foam-Tac to complete.
|
Beacon Foam-Tac
An excellent glue for bonding Carbon Fiber, EPP and Depron planes. Can be used to make a living EPP or Depron hinge. Stays flexible unlike foam safe CA. Now available in 2oz tubes (with or without nozzle), 1oz tube or the 6-pack of the 5ml tubes (1.014oz total). $15.00 per 2oz bottle with nozzle,(Nozzle can be moved from tube to tube) $13.00 per 2oz bottle without nozzle, $8.00 per 1oz tube, or $8.00 for a package of six 5ml (Mini) tubes . Quantities Limited. |
Click to Enlarge |