Miscellaneous Parts

Additional/replacement servos used in our completers

These are provided if you need a replacement servo or if you just need servos without buying the full completer
We are NOT looking at becoming a bulk servo supplier

We reserve the right to make equivalent product substitutions when availability requires.

HXT900 Micro Servo 1.6kg / 0.12sec / 9g
Standard 9g servo used in our completers

$6 each
Quantities Limited

HXT500 Micro Servo 0.8kg / 0.07sec / 6.2g
Standard 5g servo used in our completers

$6 each
Quantities Limited

This is a motor upgrade for our 32" class kits to have more power for heavier versions such as nightflyers.

SunnySky X Series
V3 X2305 1620KV F3P motor
Weight: 25g
ESC: 15-20amp

$19.95 each
Quantities Limited

Plywood Plane Hanger

A simple way to hang your model to avoid pressure on the wingtips/elevator which can cause warping. Can be used with models which use the Blue Wonder 2730 motor or the Yak55 XL. Supports the model by the engine bell and doesn't put pressure on the propsaver band.

$3.00 each
Quantities Limited

Blenderm premium medical tape by 3M which is great for making hinges. Recommended for Depron hinging.

$3.50 per roll.
Quantities Limited.

Click to Enlarge

Large (9mm) Plywood Firewall ($1.00): 1/8" light plywood; 3/8" center hole; 1 3/4" diameter; Notches sized to be snug on 9mm Flat Foamies

9mm Horns ($1.00): Extended length to support 3D style surfaces; Alignment ears for depth and hole over hinge line; 1/32" plywood; .032" wire holes

2mm Pushrod Supports and Anti-differential Servo Arm ($1.00): 1/16" plywood; 3/8" center hole for servo arm screw access; .032" wire holes; 1 3/4" between outer holes on servo arm; Pushrod guides for 2mm diameter pushrods

Medium (6mm) Plywood Firewall ($1.00): 1/8" light plywood; 3/8" center hole; 1 3/4" diameter; Notches sized to be snug on 6mm Flat Foamies

6mm Horns ($1.00): Extended length to support 3D style surfaces; Alignment ears for depth and hole over hinge line; 1/32" plywood; .032" wire holes

1.3mm Pushrod Supports and Anti-differential Servo Arm ($1.00): 1/16" plywood; 3/8" center hole for servo arm screw access; .032" wire holes; 1 3/4" between outer holes on servo arm; Pushrod guides for 1.3mm diameter pushrods

Small (3mm) Plywood Firewall ($1.00): 1/8" light plywood; 3/8" center hole; 1 3/4" diameter; Notches sized to be snug on 3mm Flat Foamies

3mm Horns ($1.00): Extended length to support 3D style surfaces; Alignment ears for depth and hole over hinge line; 1/32" plywood; .032" wire holes

These are non-flying lite-ply toys that we made for kids. We have given them out at events we go to. They have the markings similar to the actual models we sell so the kids can have one "just like dad's". The assembled plane is about a 4" wingspan.

Many people have "painted" them with colored markers to look even more like the models they've purchased.

Our Yak55 Paint Scheme

$3 each
Quantities Limited

Our Extra Paint Scheme

$3 each
Quantities Limited

Our Superslo28 Paint Scheme

$3 each
Quantities Limited

Our P-51D Paint Scheme

$3 each
Quantities Limited

Creation date: Tuesday December 1, 2020
Last updated: Friday July 14, 2023

For more information send email to RA Cores

Go To Home Page

Go To Order Form

Contact Us