9mm 1.3# EPP TallguysRC Superslo28

Customers are always asking me "What do I need to complete this kit?"
This page contains all the pieces specifically for building and flying the EPP Superslo28.
You will need batteries, a transmitter and a receiver as well.

Go To Home Page
Go To Order Form
Contact Us
The Superslo28
Click to Enlarge

This is our interpretation of TallguysRC Superslo28 kit. It has the light wing loading and great handling characteristics and yet the EPP foam gives it some resilience to the bumps and less than perfect landings seen when learning new maneuvers. The wide wing chord and fuselage height makes it exceptional for learning knife edge flight while being fully capable of 3D maneuvers. It can be flown indoors or outdoors and can be toned down to be grown with and into. This is not a self-righting trainer airplane but it is a great option for learning more advanced tricks and a fun companion indoors over the winter that will move outdoors with you in spring.

Flat Foamie Series 9mm EPP Superslo28

The link below will always contain the latest instructions which might be more up to date than the paper copy included with the kit. Plus you can click on the pictures and get large color versions to better see details.

Superslo28 Instructions

The 9mm EPP Superslo28 YouTube video playlist.

The Superslo28
Click to Enlarge

RECOMMENDED PARTS AND ACCESSORIES

Standard 9mm EPP completer
$49.95 each

Quantities Limited
The package currently includes:
24gram Brushless Outrunner (Blue Wonder) 1300kv
12amp ESC (JST Connector installed)
9g Micro Servo (qty 1 - Aileron)
5g Micro Servo (qty 2 - Rudder & Elevator)

We reserve the right to make equivalent product substitutions when availability requires.

Picture of the completer set
Click to Enlarge
O-Rings for use as Prop Savers for the Standard 9mm EPP,
3D Delta V2 and Blufo Completers. Dash Number 114
3/32" fractional width, ID 5/8", OD 13/16"

$1 for a bag of 10
Prop Saver O-Rings

Select prop based on 2S or 3S battery.

GemFan Direct Drive 8x4 props used with 3S on our 9mm EPP Extras and Yak55s, our Warbird Series, our 3D Delta V2 and BluFOs.

$1.50 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of 
								GWS Props
Click to Enlarge

GemFan Slo-Fly 9x4.7 props used with 2S on our 9mm EPP Extras and Yak55s and our Warbird Series .

$1.50 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of GWS Props
Click to Enlarge

GemFan Slo-Fly 8x4.5 props used with 3S on our 9mm EPP Extras and Yak55s and our Warbird Series .

$1.50 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of GWS Props
Click to Enlarge

GemFan Direct Drive 9x5 props used with 2S on our 9mm EPP Extras and Yak55s and our Warbird Series.

$1.50 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of GWS Props
Click to Enlarge
Beacon Foam-Tac

An excellent glue for bonding Carbon Fiber, EPP and Depron planes. Can be used to make a living EPP or Depron hinge. Stays flexible unlike foam safe CA. Now available in 2oz tubes (with or without nozzle), 1oz tube or the 6-pack of the 5ml tubes (1.014oz total).

Beacon Foam-Tac (please select size)
$15.00 per 2oz bottle with nozzle,
(Nozzle can be moved from tube to tube)
$13.00 per 2oz bottle without nozzle,
$8.00 per 1oz tube,
or
$8.00 for a package of six 5ml (Mini) tubes
.
Quantities Limited.

picture of 2oz Foam-Tac with nozzle picture of 2oz Foam-Tac without nozzle picture of 1oz Foam-Tac picture of 5ml Foam-Tac Minis
Click to Enlarge

Creation date: Friday December 9, 2022
Last updated: Saturday January 21, 2023

For more information send email to RA Cores

Go To Home Page
Go To Order Form
Contact Us